Damp Proofing Contractors Services

The beginning of winter and the arrival of colder days remind us of moisture in our living space. It is not a problem in older buildings and houses. Often, due to poor waterproofing, it occurs in the objects of a newer type.

The excessive moisture retains on cold walls, as well as on the furniture and clothes. In contact with the materials on which it can survive, every wet place becomes an ideal spot for the development of allergens, mites, and mold.

Apart from being an aesthetic problem, moisture can have a bad influence on our health. In addition to the development of these microorganisms, the air in the rooms becomes “heavy” and can affect many respiratory diseases.

Not to mention how long-lasting moisture can damage your living space. Just think of the unpleasant smell. Prevention is the best, but also the cheapest solution, if you find a good damp proofing contractor. However, rehabilitation often provides good results if done in the right way. But generally, the costs are getting higher, as time passes and the problem develops.

Why We Get All That Moisture in Our Home

The moisture problem is present in almost every house that doesn’t have proper thermal isolation, but also in those where there’s no daily ventilation of rooms. The damp and mold on the walls are the ultimate sign your object needs a repair. You have to react as soon as possible and eliminate them. It can be a long-lasting and exhausting process if you don’t use the right tools or hire a good handyman.

If you notice the moisture on the walls and floor, the root of this problem is usually poor insulation of the house. Bad thermal insulation of the interior and the exterior (or lack of it) doesn’t adjust the object to significant temperature change.

Why we need insulation read on this webpage: http://yourenergysavings.gov.au/energy/heating-cooling/insulation.

During the autumn and winter, it creates differences between the outside and the interior temperature. The process of condensation happen, and water drops appear in our house. Generally, damp can appear because of any evaporation of water, like cooking, showering, or even breathing.

External factors, such as weather conditions, can affect this unpleasant situation too. All the water that is kept in the walls (which are not done well) will enter into the interior of the house. Even the cracked or licking pipe can cause moisture.

How to Keep Dampness Under Control

Well-done damp proofing is the basis of good moisture protection. Nothing can completely protect you of moisture, but if you have a quality layer of insulation on the walls, its appearance will be drastically reduced.

Waterproofing is the best way to protect floors and walls against environmental influences which cause damp, but also from the damage that can occur. When it comes to water retention, the most exposed part of the object is a roof. You need to well protect it from atmospheric moisture. Check on this page what you need to do that.

However, floors and walls are equally important, and it is required to give them proper care too. You need to protect all the rooms in your living space, but you surely can’t isolate the bathroom and bedroom the same way. These are not exposed to the same degree of moisture.

Places such as kitchen and bathroom should be insulated from the floor to the ceiling, while for the other rooms if you have quality thermal insulation, all you need is an extra layer of hydro insulation material under the floors.

Depending on the purpose of the room, it can vary which protection material you could use. Basically, these all are some kind of extra layers and polymer-based protective coatings, which you will instal when building or renovating a room.

Extra Tips to Lower the Indoor Dampness

The condensation must happen in every house, and this process is inevitable. However, if you have already taken care of the hydro isolation, you only need to regularly maintain the hygiene in your home and ventilate the rooms. After cooking, or bathing, be sure to wipe and dry all the surfaces on which drops of water appear, as soon as possible. Already after 24 hours, the humid place will become a habitat of bacteria.

Make sure your house is evenly heated or cooled. If you have the approx temperature in all rooms, there will be no moisture in the air. You can notice that by fog or drops of water on some glass surface. If you accidentally missed a spot, and after a few days you notice the appearance of dark stains, in every dyehouse you can find specific products for cleaning of moisture.

There are various devices with the purpose to eliminate dampness from the air; prices and designs are different. You can probably use these absorbers, but there is a risk that they can dry up the air if you have them in every room.

Leave a comment

Your email address will not be published. Required fields are marked *